Braking

If ABS intervenes when braking, you will feel a pulsing in the brake pedal.

  • If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over.
  • To make a full brake application: depress the brake pedal with full force.

The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.

WARNING WARNING

Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness.

    See also:

    Driving on flooded roads
    Do not drive through flooded areas. Check the depth of any water before driving through it. Drive slowly through standing water. Otherwise, water may enter the vehicle interior or the engi ...

    Overview
    The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...

    Driving safety systems overview
    In this section, you will find information about the following driving safety systems: • ABS (Anti-lock Braking System) • BAS (Brake Assist System) • BAS PLUS (Brake Assist System Plus*) ...