Fastening seat belts

WARNING WARNING

According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat. Thus, we strongly recommend that children be placed in the rear seat whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriately sized child restraint system or booster seat recommended for the size and weight of the child. For additional information, see the "Children in the vehicle" section.

A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.

  • Adjust the seat and move the backrest to an almost vertical position ().
  • Pull the seat belt smoothly through belt sash guide 1.
  • Without twisting it, guide the shoulder section of the seat belt across the middle of your shoulder and the lap section across your hips.
  • Engage belt tongue 2 in buckle 3.
  • If necessary, adjust the seat belt to the appropriate height ().
  • If necessary, pull upwards on the shoulder section of the seat belt to tighten the belt across your body.

All seat belts except the driver's seat belt are equipped with a special seat belt retractor to securely fasten child restraint systems in the vehicle. For further information on special seat belt retractors, see ().

For more information about releasing the seat belt with release button 4, see "Releasing seat belts" ().

    See also:

    Tire labeling overview
    The following markings are on the tire in addition to the tire name (sales designation) and the manufacturer's name: 1 Uniform tire Quality Grading Standard 2 DOT, Tire Identification Number ...

    Picture settings
    Overview You can select these settings in video DVD and AUX mode. Instructions for AUX mode are detailed later. Adjusting the brightness, contrast and color Switch on video DVD mode. To sh ...

    Cruise control lever
    1 To store the current speed or a higher speed 2 To store the current speed or a lower speed 3 To deactivate DISTRONIC 4 To store the current speed or to call up the last stored speed ...