Problems with the occupant classification system
Problem
The
indicator lamp illuminates and
remains illuminated. The person on the front-passenger seat:
- has the weight of a typical adult
- has been determined by the system not to be a child.
Possible causes/consequences and Solutions
The OCS is malfunctioning.
- Have the OCS checked as soon as possible at an authorized Mercedes-Benz Center.
- Observe the additional display messages in the multifunction display ().
WARNING
If the
indicator lamp illuminates
and remains illuminated when the weight of a typical adult or someone larger than
a small individual has been detected on the passenger seat, do not allow any occupant
to use the passenger seat until the system has been repaired.
Problem
The
indicator lamp does not illuminate
and/or does not remain illuminated. The front-passenger seat is:
- unoccupied
- occupied with a weight up to or less than a typical 12- month-old child in standard child restraint system
Possible causes/consequences and Solutions
The OCS is malfunctioning.
- Make sure there is nothing between the seat cushion and the child seat.
- Check the installation of the child restraint system.
- Make sure that no objects are applying additional weight onto the seat.
- If the
indicator lamp does
not illuminate, have the OCS checked as soon as possible at an authorized Mercedes-
Benz Center. Do not transport a child on the front-passenger seat as long as
the OCS is not functioning. - Observe the additional display messages in the multifunction display ().
WARNING
If the
indicator lamp does not illuminate
or remains out with the weight of a typical 12-month-old child in a standard child
restraint or less, or is unoccupied, on the front-passenger seat, do not transport
a child on the front-passenger seat until the system has been repaired.
See also:
Tire pressure of cold tires
The tires are cold:
• if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
• if the vehicle has not been driven more than
1 mile (1.6 km). ...
Opening and closing
Overhead control panel
1 To open
2 To open
3 To close
Turn the SmartKey to position
1 or 2 in the ignition lock.
Press or pull the
switch in the corresponding
direction.
If you press ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers
and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press
the Start/Stop but ...
