Calling up a stored parking position setting

ignition lock. Turn the SmartKey to position 2 in the ignition lock.
side with the corresponding Adjust the exterior mirror on the frontpassenger side with the corresponding button.
Engage reverse gear.
The exterior mirror on the front-passenger side moves to the stored parking position.

The exterior mirror on the front-passenger side moves back to its original position:
• as soon as you exceed a speed of 9 mph (15 km/h).
• about ten seconds after you have disengaged reverse gear
• if you press button 4 for the exterior mirror on the driver's side

    See also:

    Storing the current speed or calling upthe last stored speed
    WARNING   The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising ...

    Transfer case
    This section is only valid for vehicles with 4-wheel drive (4MATIC). Power is always transmitted to both axles. Performance tests may only be carried out on a 2-axle dynamometer. The brake ...

    Setting the temperature
    You can set the temperature separately for the driver’s and front-passenger side. Select left temperature display 1 or right temperature display 7 in the airconditioning function bar by turnin ...