Storing the current speed or calling upthe last stored speed

Mercedes-Benz GL-Class / Mercedes-Benz GL-Class Owners Manual / Driving and parking / Driving systems / DISTRONIC / Storing the current speed or calling upthe last stored speed

WARNING The set speed stored in memory should only 
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

► Briefly pull the cruise control lever towards you 4.

► Remove your foot from the accelerator pedal.

DISTRONIC is activated and accepts the current speed if it is activated for the first time, or adjusts the vehicle's speed to the last speed stored.

    See also:

    Low-beam headlamps
    To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster li ...

    Cleaning the wiper blades
    WARNING   Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/S ...

    Cleaning the trailer tow hitch
    The ball coupling must be cleaned if it becomes dirty or corroded. – Remove rust on the ball of the ball coupling, e.g. with a wire brush. – Remove dirt with a clean, lint-free cloth or a brus ...