Safety notes
WARNING
Work improperly carried out on electronic
components and associated software could
cause them to cease functioning. Because the
vehicle's electronic components are
interconnected, any modifications made may
produce an undesired effect on other
systems. Electronic malfunctions could
seriously impair the operating safety of your
vehicle.
Contact an authorized Mercedes-Benz Center
for repairs or modifications to electronic
components.
Other improper work or modifications on the
vehicle could also have a negative impact on
the operating safety of the vehicle.
Some safety systems only function when the
engine is running. You should therefore never
turn off the engine while driving.
WARNING
Heavy blows against the vehicle underbody or
tires/wheels may cause serious damage and
impair the operating safety of your vehicle.
Such blows can be caused, for example, by
running over an obstacle, road debris or a
pothole.
If you feel a sudden significant vibration or
ride disturbance, or you suspect that damage
to your vehicle has occurred:
• turn on your hazard warning flashers.
• slow down carefully.
• drive with caution to an area which is a safe distance from the road.
Inspect the vehicle underbody and tires/wheels for possible damage. If the
vehicle
appears unsafe, have it towed to the nearest
authorized Mercedes-Benz Center or other
qualified maintenance or repair facility for
further inspection or repairs.
See also:
Vehicle identification number (VIN)
The vehicle identification number (VIN) can be found in the following locations:
on the vehicle identification plate ()
on the lower edge of the windshield ()
In addition to being stamped on ...
Tire pressure of cold tires
The tires are cold:
- if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
- if the vehicle has not been driven more than
1 mile (1.6 km). ...
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control
lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...