Stowing a used collapsible spare wheel
Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Only place the collapsible spare wheel in the vehicle when it is dry. Otherwise, moisture may get into the vehicle.
•► Unscrew the valve cap from the valve.
•► Use the back of the valve cap to unscrew the valve insert from the valve and release the air.
Fully deflating the tire can take a few minutes.
•► Screw the valve insert back into the valve.
•► Screw the valve cap back on.
•► Remove the protective sheet from the vehicle tool kit and pull it over the collapsible spare wheel.
•► Stow the collapsible spare wheel in the emergency spare wheel well under the trunk.
See also:
Matte finish care
If your vehicle has a clear matte finish,
observe the following instructions in order to
avoid damage to the paintwork due to
incorrect care.
These notes also apply to light alloy wheels
with ...
Hood
Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose ...
Load index
Tire data is vehicle-specific and may
deviate from the data in the example.
In addition to the load bearing index, load
index 1 may be imprinted after the letters
that identify speed r ...
