Cleaning the display
•► Before cleaning the display, make sure that it is switched off and has cooled down.
•► Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.
•► Dry the display surface using a dry microfiber cloth.
For cleaning, do not use any of the following:
- alcohol-based thinner or gasoline
- abrasive cleaning agents
- commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
High-beam headlamps
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to .
Press the combination switch beyond the
pressure p ...
Hill start assist
Hill start assist helps you when pulling away
forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you
have removed your foot from the brake pedal.
This give ...
Service and literature
Your vehicle is covered under the terms of the
warranties printed in the Service and
Warranty Information booklet. Your
authorized Mercedes-Benz Center will
exchange or repair any defective parts
...