Power washers

WARNING
Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident.

Always maintain a distance of at least 11.8 in (30 cm) between the vehicle and the power washer nozzle. Information about the correct distance is available from the equipment manufacturer.

Move the power washer nozzle around when cleaning your vehicle.

Do not aim directly at any of the following:

 - tires
 - door gaps, roof gaps, joints etc.
 - electrical components
 - battery
 - connectors
 - lights
 - seals
 - trim elements
 - ventilation slots

Damaged seals or electrical components can lead to leaks or failures.

    See also:

    Notes for 4MATIC vehicles
    Vehicles with 4MATIC must not be towed with either the front or the rear axle raised, as doing so will damage the transmission. If the vehicle has transmission damage or damage to the front or ...

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, press the ...

    Chassis and suspension: Agile handling and high comfort
    The AGILITY CONTROL suspension, which is standard equipment in both the C-Class Saloon and Estate, harmonises perfectly with the dynamic design. It is based on an amplitude-dependent damping syste ...