Multifunction display - Displays and operation - On-board computer and displays - Mercedes-Benz E-Class Sedan and Wagon Owners Manual - Mercedes-Benz E-Class | Mersag.com

Multifunction display

Mercedes-Benz E-Class / Mercedes-Benz E-Class Sedan and Wagon Owners Manual / On-board computer and displays / Displays and operation / Multifunction display

Values and settings as well as display messages are shown in the multifunction display.

1. Description field

1. Description field
2. Menu bar
3. Drive program
4. Transmission position
5. Outside temperature or speed

•► To show menu bar 2: press the or button on the steering wheel. or The following messages may appear in the button on the steering wheel.

The following messages may appear in the multifunction display:

Rear window wiper Parking Guidance

Adaptive Highbeam Assist Rear window wiper

ATTENTION ASSIST Adaptive Highbeam Assist

Lane Keeping Assist or Active ATTENTION ASSIST

Lane Keeping Assist or Active Lane Keeping Assist

HOLD HOLD function

Menus and submenus PRE-SAFE® Brake

See also:

Before changing a fuse
Park the vehicle and apply the parking brake. Switch off all electrical consumers. Remove the SmartKey from the ignition lock. The fuses are located in various fuse boxes: ...

Raising the vehicle
WARNING When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at t ...

Maximum load rating
WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can over ...