Storing the current speed or calling up a stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from returning to the preset speed
could cause an accident and/or serious injury
to you and others.
•► Briefly pull the cruise control lever towards you 4.
•► Remove your foot from the accelerator pedal.
DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value.
See also:
Correct use of the seat belts
WARNING
USE SEAT BELTS PROPERLY
• Seat belts can only work when used
properly. Never wear seat belts in any other
way than as described in this section, as
that could result in seriou ...
Resetting the side windows
You must reset each side window if a side
window can no longer be closed fully.
Close all the doors.
Turn the SmartKey to position 1
or 2 in the ignition lock.
Pull the corresponding switch ...
Belt height adjustment
You can adjust the seat belt height on the
driver's seat and the front-passenger seat.
Wagon: you can also adjust the belt height
on the outer rear seats.
Adjust the height so that the upper p ...