Shift ranges

Introduction

When the automatic transmission is in position D, it is possible to restrict or derestrict the shift range.

The shift range selected is shown in the multifunction display. The automatic transmission shifts only as far as the selected gear.

Restricting the shift range

Restricting the shift range

•► Pull the left-hand steering wheel paddle shifter.

The automatic transmission shifts down one gear and restricts the shift range to the relevant gear.

If the engine exceeds the maximum engine speed when shifting down, the automatic transmission protects against engine damage by not shifting down.

If the maximum engine speed for the shift range is reached and you continue to accelerate, the automatic transmission shifts up in order to prevent the engine from overrevving, even if the shift range is restricted.

Derestricting the shift range

•► Pull the right-hand steering wheel paddle shifter.

The shift range is derestricted.

Clearing the shift range restriction

•► Pull and hold the right-hand steering wheel paddle shifter until D is shown again in the multifunction display.

The automatic transmission shifts from the current shift range directly to D.

Selecting the ideal shift range

•► Pull the left-hand steering wheel paddle shifter and hold it in position.

The automatic transmission shifts to the gear which allows optimum acceleration and deceleration. To do this, the automatic transmission shifts down one or more gears.

    See also:

    Washing by hand
    In some countries, washing by hand is only allowed at specially equipped washing bays. Observe the legal requirements in all countries concerned. – Do not use hot water and do not wash the veh ...

    Driving downhill
    Drive slowly. Do not drive at an angle down steep inclines. Steer into the line of fall and drive with the front wheels aligned straight. Otherwise, the vehicle could slip sideways, tip and ...

    Activating AUX mode
    AUX drive Select AUX in the menu using the buttons on the remote control and press the button to confirm. The AUX menu appears. Select Source from the AUX menu and press the button to ...