Calling up a stored parking position setting

•► Turn the SmartKey to position 2 in the ignition lock.
•► Adjust the exterior mirror on the frontpassenger side with the corresponding button
•► Engage reverse gear.

The exterior mirror on the front-passenger side moves to the stored parking position.

The exterior mirror on the front-passenger side moves back to its original position:

 - as soon as you exceed a speed of 6 mph (10 km/h)
 - about ten seconds after you have disengaged reverse gear
 - if you press button 1 for the exterior mirror on the driver's side

    See also:

    Lowering the vehicle
      Turn the crank of the jack counterclockwise until the vehicle is once again standing firmly on the ground.   Place the jack to one side.   Tighten the wheel bolts evenly in a ...

    Using the TIREFIT kit
    You can use the TIREFIT kit to seal small punctures, particularly those in the tire tread. You can use TIREFIT at outside temperatures down to -4 °F (-20 °C). WARNING TIREFIT is a limited ...

    Setting the time
    Select Vehicle in the main function bar by turning the COMAND controller and press to confirm. Select System by turning the COMAND controller and press to confirm. Select Time by ...