Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes.
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
Switch on the hazard warning lamps.
When towing with the hazard
warning
lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.
Turn the SmartKey to position 2 in the
ignition lock.
When the vehicle is stationary, depress the
brake pedal and keep it depressed.
Shift the automatic transmission to
position N.
Release the brake pedal.
Release the parking brake.
See also:
Active Blind Spot Assist
Important safety notes
Active Blind Spot Assist uses a radar sensor
system to monitor the side areas of your
vehicle which are in back of the driver. A
warning display in the exterior mirrors d ...
Checking tire pressure manually
To determine and set the correct tire
pressure, proceed as follows:
Remove the valve cap of the tire that is to
be checked.
Press the tire pressure gauge securely onto
the valve.
Read the ...
Automatic interior lighting control
To switch on/off: press
the button.
When the automatic interior lighting
control is activated, the button is flush with
the overhead control panel.
The interior lighting automatically switch ...