Preparing the vehicle

WARNING
The wheel and tire size of the emergency spare wheel/spare wheel may differ to that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling characteristics of the vehicle may change.
Adapt your style of driving accordingly.
Never operate the vehicle with more than one emergency spare wheel/spare wheel that differs in size.
Only use an emergency spare wheel/spare wheel of a differing size briefly and do not switch off ESP®.
When using an emergency spare wheel, you must not exceed the maximum speed of 50 mph (80 km/h).

WARNING
Have the emergency spare wheel/spare wheel replaced with a new wheel as soon as possible at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required.
Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.

emergency spare wheel are not equipped Vehicles without a spare wheel/ emergency spare wheel are not equipped with a tire-change tool kit at the factory. For more information on which tools are required to perform a wheel change on your vehicle, e.g. wheel chock, lug wrench or alignment bolt, consult an authorized Mercedes-Benz Center.

  Remove the following items (depending on the vehicle's equipment) from the  Prepare the vehicle as described.
stowage well under the trunk/trunk floor:  Remove the following items (depending on the vehicle's equipment) from the stowage well under the trunk/trunk floor:
• the emergency spare wheel
• the folding wheel chock
• the lug wrench
• the jack
Securing the vehicle to prevent it from rolling away  Secure the vehicle to prevent it from rolling away.

    See also:

    Switching on the manual drive program
    The manual drive program is only available for vehicles with the dynamic handling package and for AMG vehicles. Manual drive program M is different from drive program S (in AMG vehicles, drive ...

    Showing/hiding the menu
    This function is not available while the DVD's own menu is being displayed. To show: press the COMAND controller. or Select Menu while the navigation menu is shown and press to confirm. ...

    Opening and closing
    Overhead control panel 1 To open 2 To open 3 To close Turn the SmartKey to position 1 or 2 in the ignition lock. Press or pull the switch in the corresponding direction. If you press ...