Storing the current speed or calling up a stored speed

WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

lever towards you 4. Briefly pull the cruise control lever towards you 4.
accelerator pedal. Remove your foot from the accelerator pedal.
DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value.

    See also:

    Xenon bulbs
    If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the ...

    Vehicles with a TIREFIT kit
    – Lift the trunk floor up. 1 Lug wrench 2 Jack 3 Tire sealant filler bottle 4 Alignment bolt 5 Tire inflation compressor 6 Folding wheel chock 7 Warning triangle 8 Ratchet wrench 9 Towing ...

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you if the pressure drops i ...