Rear-end structure: side members with specifically graduated material thicknesses
Multi-piece side members and a robust, flexible crossmember made from ultra-high-strength steel form the key components of the rear-end structure. The rear side members are continuous, closed box sections with carefully graduated material thicknesses. These are able to absorb high forces, thereby making a decisive contribution to occupant safety in the event of a rear impact. The bolt-on flexible crossmember is manufactured using a flexible rolling process which likewise allows the material thickness to be varied as required. Accordingly, the material thickness on the outside of the crossmember - where impact loads are highest - is greater than on the inside.
See also:
Cup holders
Important safety notes
WARNING
In order to help prevent spilling liquids on
vehicle occupants and/or vehicle equipment,
only use containers that fit into the cup
holder. Use lids on o ...
Resetting
Reset the sliding sunroof if it does not move
smoothly.
Turn the SmartKey to position 2 in the
ignition lock.
Raise the sliding sunroof fully at the rear.
Keep the switch pressed for
...
Cleaning the trailer tow hitch
The ball coupling must be cleaned if it
becomes dirty or corroded.
– Remove rust on the ball of the ball coupling,
e.g. with a wire brush.
– Remove dirt with a clean, lint-free cloth or
a brus ...