Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the
defrosting
function until the windshield is clear again.
Turn the SmartKey to position
2 in the ignition lock.
To activate: press the
button.
The indicator lamp in the button
lights up.
The climate control system switches to the following functions:
• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and front side windows
• air-recirculation mode off
To switch off: press the
button.
The indicator lamp in the button
goes
out. The previously selected settings come
into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
Press the
button.
The indicator lamp in the button
goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn temperature control 1 or 6
clockwise or counter-clockwise.
or
Press the
or
button.
See also:
SmartKey
0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
The Smar ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences ...
Checklist after driving off-road
WARNING
If you notice sudden significant vibrations or
unusual handling performance or if you
suspect that damage has occurred to the
vehicle, you should activate the hazard
warning l ...