Replacing the windshield wiper blades

Removing the wiper blades

ignition lock or turn it to position 0 (KEYLESS-GO). Remove the SmartKey from the ignition lock or turn it to position 0 (KEYLESS-GO).
windshield until it engages. Fold the wiper arm away from the windshield until it engages.
to the wiper arm. Set the wiper blade at right angles to the wiper arm.

Remove the wiper blade from the

retaining Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.

Installing the wiper blades

the Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow.
Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.
the wiper Turn the wiper blade parallel to the wiper arm.
windshield. Fold the wiper arm back onto the windshield.

    See also:

    Introduction
    You can establish a Bluetooth® connection to the audio system or to COMAND (see the separate operating instructions). WARNING A driver's attention to the road must always be his/her prima ...

    Important safety notes
    The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs the following tasks: - corrosion protection - antifreeze protection - raising the boiling point The engine coo ...

    Recommended tire pressure
    The recommended tire pressure applies to the tires mounted at the factory. The Tire and Loading Information placard contains the recommended tire pressures for cold tires on a fully loaded vehi ...