Position of the steering wheel for driving

The steering wheel is moved to the last selected position when:
• the driver's door is closed.
• you insert the SmartKey into the ignition lock.
or
• you press the Start/Stop button once on vehicles with KEYLESS-GO.

When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.

The last position of the steering wheel is stored after each manual setting or when you store the setting with the memory function.

    See also:

    Servicing the brakes
    If the red brake warning lamp lights up in the instrument cluster and you hear a warning tone while the engine is running, the brake fluid level may be too low. Observe additional warning messag ...

    Deactivating/activating ESP®
    Observe the "Important safety notes" section. WARNING ESP® should not be deactivated during normal driving other than in the circumstances described below. Disabling the system ...

    Tire tread
    WARNING   Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we r ...