Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

Turn the SmartKey to position 1 Close all the doors.
or 2 in the ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
the door control panel until the side window is completely closed. Pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.

If the side window opens again slightly:
switch on the door control panel until the side window is completely closed. Immediately pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.
remains closed after the button has been released, the side window has been If the corresponding side window remains closed after the button has been released, the side window has been reset correctly. If this is not the case, repeat the steps above again.

    See also:

    Opening/closing the garage door
    Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system. ...

    Position of the steering wheel when the EASY-ENTRY/EXIT feature is active
    The steering wheel swings upwards when you: • remove the SmartKey from the ignition lock • open the driver's door and KEYLESS-GO is in position 1 • open the driver's door and the SmartKey is in pos ...

    Opening
    Switch off the engine. emove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having removed the SmartK ...