Important safety notes

WARNING WARNING

Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others. Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.

WARNING WARNING

Follow the recommended settings for heating and cooling given on the following pages. Otherwise, the windows could fog up, impairing visibility and endangering you and others.

Automatic climate control controls the temperature and the humidity in the vehicle interior and filters undesirable substances from the air.

Automatic climate control is only operational when the engine is running. Optimum operation is only achieved if you drive with the side windows and panorama roof with power tilt/sliding panel closed.

convenience opening feature (). This will speed up the cooling process Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (). This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.

filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g. heavy air pollution, the interval may be shorter than stated in the Service Booklet.

an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.

    See also:

    Automatic engine switch-off
    The ECO start/stop function switches the engine off automatically if the vehicle is braked to a standstill and the brake remains depressed with the transmission in position D or N. You can s ...

    Uploading/downloading data
    With this function, you can transfer COMAND data from one system (vehicle) to another system (vehicle). You can use either a USB stick or an SD card as temporary storage. You can only transfer ...

    The windshield wipers are inoperative
    The windshield wiper drive is malfunctioning. - Select another wiper speed on the combination switch. - Have the windshield wipers checked at a qualified specialist workshop. ...