Installing/removing the towing eye
Installing the towing eye
Vehicles with a trailer tow hitch: if possible secure the towing device on the trailer tow hitch.
► Remove the towing eye from the vehicle tool kit.
WARNING 
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
► Press the mark on cover 1 inwards in
the
direction of the arrow.
► Take cover 1 off the opening.
► Screw the towing eye in clockwise to the
stop and tighten it.
Removing the towing eye
► Loosen the towing eye and unscrew it.
► Attach cover 1 to the bumper and press
until it engages.
► Place the towing eye in the vehicle tool
kit.
See also:
Detecting a parking space
Active Parking Assist is switched on
automatically when driving forwards. The
system is operational at speeds of up to
approximately 22 mph (35 km/h). While in
operation, the system independen ...
Tire pressure of 180 kPa (1.8 bar/
26 psi) is reached
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
After use, excess TIREFIT may run out of
the filler hose. This could cause stains.
...
Important safety notes
WARNING
Make sure absolutely no objects are obstructing the pedals' range of movement.
Keep the driver's footwell clear of all obstacles. If there are any floormats or
carpets in the ...