Lowering the vehicle
WARNING
Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise damage the wheel rim.
- Place the ratchet wrench onto the hexagon nut of the jack so that the letters AB are visible.
- Turn the ratchet wrench until the vehicle is once again standing firmly on the ground.
- Place the jack to one side.
- Tighten the wheel bolts evenly in a crosswise pattern in the sequence indicated (: to A). The tightening torque must be 110 lb-ft (150 Nm).
WARNING
Have the tightening torque checked immediately after a wheel is changed. The wheels could come loose if they are not tightened to a torque of 110 lb/ft (150 Nm).
- Turn the jack back to its initial position and store it together with the rest of the tirechange tool kit in the cargo compartment.
- Transport the defective wheel in the cargo compartment.
For further information on stowing the collapsible spare wheel, see ().
When you are driving with the collapsible spare wheel mounted, the tire pressure loss warning system or the tire pressure monitoring system cannot function reliably. Only restart the tire pressure loss warning system/tire pressure monitoring system when the defective wheel has been replaced with a new wheel.
Vehicles with tire pressure monitoring system: all mounted wheels must be equipped with functioning sensors and the defective wheel should no longer be in the vehicle.
See also:
Service and literature
Your vehicle is covered under the terms of the warranties printed in the Service
and Warranty Information booklet. Your authorized Mercedes-Benz Center will exchange
or repair any defective parts ...
Cup holder in the rear seat armrest
! Do not sit on or support your body weight
on the rear seat armrest when it is folded
down, as you could otherwise damage it.
! Close the cup holder before folding the
rear seat armrest up. Ot ...
Digital speedometer
Press the or
button on the
steering wheel to select the Trip menu.
Press or
to select the digital
speedometer.
1 Digital speedometer ...