See also:

Tire labeling overview
The following markings are on the tire in addition to the tire name (sales designation) and the manufacturer's name: 1. Uniform tire Quality Grading Standard 2. DOT, Tire Identification Num ...

Tire pressure of 180 kPa (1.8 bar/ 26 psi) is reached
– Switch off the tire inflation compressor. – Unscrew the filler hose from the valve of the faulty tire. After use, excess TIREFIT may run out of the filler hose. This could cause stains. ...

Storing the current speed or calling upthe last stored speed
WARNING   The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising ...