High-beam headlamps
- To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to
or 
or
. - Press the combination switch beyond the pressure point in the direction
of arrow 1.
In the or
position, the highbeam headlamps
are only switched on when it is dark and the engine is running. The
indicator lamp in the instrument
cluster lights up when the high-beam headlamps are switched on. - To switch off the high-beam headlamps: move the combination switch back
to its normal position. The indicator
lamp in the instrument cluster goes out.
See also:
Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle
tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particu ...
Driving tips
Observe the notes on ESP® trailer stabilization ().
The maximum permissible speed for vehicle/ trailer combinations depends on the
type of trailer. Before beginning the journey, check the traile ...
Warning displays
The warning displays show the distance between the sensors and the obstacle.
The warning display for the front area is located on the dashboard above the center
air vents. The warning display for ...