Parking lamps/standing lamps (halogen headlamps)

- Turn housing cover 1 counter-clockwise

- Turn housing cover 1 counter-clockwise and pull it out.
- Pull out bulb holder 2.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Insert bulb holder 2.
- Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Storing and maintaining the current speed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). Accelerate the vehicle to the desired speed. Briefly press the cruise control lever up 1 or down 2. Remove your ...

    Clearing the memory of the integratedgarage door opener on the rear-viewmirror
    ► Turn the SmartKey to position 2 in the ignition lock. ► Press transmitter buttons 2 and 4. The indicator lamp lights up yellow. ► Press and hold transmitter buttons 2 and 4 ...

    Floormat on the driver's side
    WARNING Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fastening ...