Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

  • Close all the doors.
  • Turn the SmartKey to position 1 or 2 in the ignition lock.
  • Pull the corresponding switch on the door control panel until the side window is completely closed. ()
  • Hold the switch for an additional second.

If the side window opens again slightly:

  • Immediately pull the corresponding switch on the door control panel until the side window is completely closed ().
  • Hold the switch for an additional second.
  • If the corresponding side window remains closed after the button has been released, the side window has been reset correctly. If this is not the case, repeat the steps above again.
    See also:

    Checking the tire pressures
    Important safety notes WARNING   Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling ...

    Activating/deactivating airrecirculation mode
    You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated. The operation of air-recirculati ...

    Windshield/headlamp cleaning system
    WARNING Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. Use MB Summe ...