Convenience opening feature
You can ventilate the vehicle before you start driving. To do this, the key is used to carry out the following functions simultaneously:
- unlock the vehicle
- open the side windows
- open the panorama roof with power tilt/ sliding panel and the roller sunblinds
The convenience opening feature can only be operated using the SmartKey. The
SmartKey must be close to the driver's door handle.
- Point the tip of the SmartKey at the driver's door handle.
- Press and hold the
button
until the side windows and the panorama roof with power tilt/sliding panel are
in the desired position.
If the roller sunblinds of the panorama roof with power tilt/sliding panel are closed, the roller sunblinds are opened first.
- Press and hold the
button
again until the panorama roof with power tilt/sliding panel is in the desired
position. - To interrupt convenience opening: release the
button.
See also:
Setting the airflow
Turn the SmartKey to position 2 in the ignition lock.
To increase/reduce: press the
or
button.
...
High-beam headlamps
- To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
- Turn the light switch to or
or
.
- Press the combination switch beyond the ...
DISTRONIC PLUS displays in the
speedometer
When you switch on DISTRONIC PLUS,
triangle 2 shows the stored speed.
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
I ...