Important safety notes

WARNING WARNING

When opening or closing the door windows, make sure there is no danger of anyone being harmed by the opening/closing procedure.

The door windows are equipped with the express operation and automatic reversal function. If in express operation mode a door window encounters an obstruction that blocks its path, the automatic reversal function will stop the door window and open it slightly.

The door windows operate differently when the switch is pulled and held. See the section about the side windows.

The closing of the door windows can be immediately halted by releasing the switch or, if the switch was pulled past the resistance point and released, by either pressing or pulling the respective switch.

If a door window encounters an obstruction that blocks its path in a circumstance where you are closing the door windows by pressing and holding button function will not operate. on the SmartKey the automatic reversal function will not operate.

Activate the override switch when children are riding in the back seats of the vehicle. The children may otherwise injure themselves, e.g. by becoming trapped in the door window opening.

WARNING WARNING

Do not keep any part of your body up against the window pane when opening a window. The downward motion of the pane may pull that part of your body down between the window pane and the door frame and trap it there. If there is a risk of entrapment, release the switch and pull it to close the window.

    See also:

    Folding the rear bench seat back
    ► Pull release catch 3 upwards. ► Fold backrest 2 backwards until it engages, making sure not to trap the seat belts while doing so. ► Fold seat cushion 1 backwards and push u ...

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. – Turn the SmartKey to position 2 (Y page 139) in the ignition lock. On vehicles with KEYLES ...

    Vehicle
    Display messages Possible causes/consequences and Solutions Shift to 'P' or 'N' to Start Engine You have attempted to start the engine with the transmission i ...