Automatic headlamp mode
To switch on automatic
headlamp
mode: turn the light switch to 
or 
.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
With the engine running: depending on the
brightness of the ambient light, the daytime
running lamps or the low-beam headlamps
are switched on or off automatically.
When the low-beam headlamps are
switched on, the 
indicator lamp in
the
instrument cluster lights up.
WARNING
If the light switch is set to
or , the
low-beam headlamps will not come on
automatically if it is foggy. This could
endanger you and others. Therefore, turn the
light switch to in fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.
See also:
Requirements for a Bluetooth® connection
You can connect mobile phones and
notebooks to COMAND.
To do so, the following conditions need to be
met:
• Bluetooth®-capable devices, e.g. mobile
phones, must comply with a certain profile ...
Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating
the stationary vehicle for up to 30 minutes after the engine has been switched off.
The heating time depends on th ...
Setting the rear-compartment side air
vents
These rear-compartment side air vents are
only available if your vehicle has 3-zone
automatic climate control.
1 B-pillar air vent
2 Thumbwheel for B-pillar air vent
- To open/close: turn thu ...