Installing the towing eye

tool kit. Remove the towing eye from the vehicle tool kit.

WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

Press the mark on cover 1 inwards in the

direction of the arrow. Press the mark on cover 1 inwards in the direction of the arrow.

Screw the towing eye in clockwise to the Take cover 1 off the opening.

stop and tighten it. Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    Cargo tie-down rings
    Observe the following notes on securing loads: secure the load using the cargo tie down rings. do not use elastic straps or nets to secure a load, as these are only intended as an anti-slip p ...

    Activating/deactivating the MONOfunction
    The MONO function is only available with automatic climate control.18 You can use the MONO function to adopt the settings configured for temperature, air distribution and airflow on the driver's s ...

    Service messages
    Information on the type of service and service intervals (see separate Service Booklet). You can obtain further information from an authorized Mercedes-Benz Center or at http://www.mbusa.com (U ...