Message memory

The on-board computer saves certain display messages. You can call up the display messages in the message memory.

button on the steering wheel to Press the button on the steering wheel to or select the Service menu. button on the steering wheel to select the Service menu.

If there are display messages, the multifunction display shows, for example, 2 messages.

button to select the entry, e.g. Press the button to select the entry, e.g. or 2 messages. button to select the entry, e.g. 2 messages.

Press the or Confirm with Press the or.

button to scroll through the Press the button to scroll through the or display messages. button to scroll through the display messages.

When the ignition is switched off, all display messages are deleted apart from some highpriority display messages. Once the causes of the high-priority display messages have been rectified, the corresponding display messages are also deleted.

    See also:

    Opening and closing
    You can continue to operate the sliding sunroof after switching off the engine or removing the SmartKey from the ignition lock. This function is available for up to five minutes or until th ...

    Low-beam headlamps (halogen headlamps)
    - Remove the cover in the front wheel arch. - Turn housing cover 1 counter-clockwise and pull it out. - Turn bulb holder 2 counter-clockwise and pull it out. - Take the bulb out of bulb holde ...

    Unlocking the driver's door (mechanical key)
    If the vehicle can no longer be unlocked with the SmartKey, use the mechanical key. If you use the mechanical key to unlock and open the driver's door, the anti-theft alarm system will be trigg ...