See also:

Tire pressure of 180 kPa (1.8 bar/ 26 psi) is reached
– Switch off the tire inflation compressor. – Unscrew the filler hose from the valve of the faulty tire. After use, excess TIREFIT may run out of the filler hose. This could cause stains. ...

Brake fluid level
If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake lin ...

Change of direction
Introduction Changes of direction have three phases: • preparation phase • announcement phase • change-of-direction phase Preparation phase COMAND prepares you for the upcoming change of ...