Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/or serious injury to you and others.
Press the cruise control lever up 1 for a
higher speed or down 2 for a lower speed.
Keep the cruise control lever pressed until
the desired speed is reached.
Release the cruise control lever.
The new speed is stored.
Cruise control is not deactivated if you
depress the accelerator pedal. For
example, if you accelerate briefly to
overtake, cruise control adjusts the
vehicle's speed to the last speed stored
after you have finished overtaking.
See also:
Important safety notes
While the vehicle is in motion, the tire
pressure loss warning system monitors the
set tire pressure using the rotational speed of
the wheels. This enables the system to detect
significant pre ...
Switching the rear window wiper on/off
Combination switch
1 Switch
2 To wipe with washer fluid
3 To switch on intermittent
wiping
4 To switch off intermittent
wiping
5 To wipe with washer fluid
Turn the SmartKey to positi ...
Low-beam headlamps
- To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
- Turn the light switch to .
The indicator lamp in the
instrument
cluster lig ...