Daytime running lamps

Daytime running lamps in Canada

The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated.

. Turn the light switch to . or With the engine running: depending on the.

With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.

When the low-beam headlamps are activated, the the indicator lamp on the light switch lights up.

When the engine is running and the vehicle is stationary or if the electronic parking brake is applied: if you move the selector lever from a drive position to P, the daytime running lamps/low-beam headlamps go out after three minutes.

When the engine is running, the vehicle is stationary and in high ambient light brightness: if you turn the light switch to the, the daytime running lamps and the parking lamps are switched on.

If the engine is running and you turn the light switch to take, the manual settings take precedence over the daytime running lamps.

Daytime running lamps in the USA

In the USA, the daytime running lamps are deactivated upon delivery from the factory.

lamps: activate the daytime running lamps To activate the daytime running lamps: activate the daytime running lamps function in the on-board computer.

. Turn the light switch to . or With the engine running: depending on the.

With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.

When the low-beam headlamps are activated, the the indicator lamp on the light switch lights up.

If the engine is running and you turn the light switch to , the manual settings or take precedence over the daytime running, the manual settings take precedence over the daytime running lamps.

    See also:

    Rolling with the engine switched off
    WARNING There is no power assistance for the steering and the brake when the engine is not running. Steering and braking requires significantly more effort and you could lose control of the v ...

    Heavy and light loads
    WARNING Depressing the brake pedal constantly results in excessive and premature wear to the brake pads. It may also cause the brakes to overheat, seriously impairing their effectiveness. I ...

    Important notes on the use of KEYLESS-GO
    • The KEYLESS-GO key can be used like a conventional key. • You can combine KEYLESS-GO functions with those of a conventional key, e.g. unlock with KEYLESS-GO and lock with the button. • ...