Braking

If ABS intervenes when braking, you will feel a pulsing in the brake pedal.

brake pedal with force until the braking If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over.
force. To make a full brake application: depress the brake pedal with full force.

The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.

WARNING
Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness.

    See also:

    Crash-responsive EASY-EXIT feature
    If the crash-responsive EASY-EXIT feature is triggered in an accident, the steering column will move upwards when the driver's door is opened. This occurs irrespective of the position of the S ...

    CD/DVD drive and AUX jacks
    The CD/DVD drive is located in the center behind the front seats. 1 CD/DVD slot 2 AUX, right-hand (R) jack for audio signal 3 AUX, left-hand (L) jack for audio signal 4 AUX, jack for vid ...

    Making adjustments in 1 mph (Canada:1 km/h) increments
    ► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...