Notes on care

Regular care of your vehicle is a condition for retaining the quality in the long term.

Use care products and cleaning agents recommended and approved by Mercedes- Benz.

WARNING
Many cleaning products can be hazardous.

Some are poisonous, others are flammable.

Always follow the instructions on the particular container. Always open your vehicle's doors or windows when cleaning the inside.

Never use fluids or solvents that are not designed for cleaning your vehicle.

Always lock away cleaning products and keep them out of reach of children.

For cleaning your vehicle, do not use any of the following:

 - dry, rough or hard cloths
 - abrasive cleaning agents
 - solvents
 - cleaning agents containing solvents

Do not scrub.

Do not touch the surfaces or protective films with hard objects, e.g. a ring or ice scraper. You could otherwise scratch or damage the surfaces and protective film

Environmental note
 Dispose of empty packaging and cleaning cloths in an environmentally responsible manner.

Do not park the vehicle for an extended period straight after cleaning it, particularly after having cleaned the wheels with wheel cleaner. Wheel cleaners could cause increased corrosion of the brake discs and brake pads/linings. For this reason, you should drive for a few minutes after cleaning. Braking heats the brake discs and the brake pads/linings, thus drying them.

The vehicle can then be parked.

    See also:

    High-beam flasher
    To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. Pull the combination switch in the direction of arrow 3. ...

    Comprehensive restraint system for the best possible occupant protection
    Combined with the front and rear deformation zones, the high-strength occupant cell forms an effective basis for occupant protection systems that include: adaptive, two-stage airbags for the dri ...

    Setting the time
    Select Vehicle in the main function bar by turning the COMAND controller and press to confirm. Select System by turning the COMAND controller and press to confirm. Select Time by ...