Selector lever

Overview of transmission positions

Selector lever in AMG vehicles with P button

Selector lever in AMG vehicles with P button
P Park position with parking lock
R Reverse gear
N Neutral
D Drive

Transmission position and drive program display

1. Transmission position display

1. Transmission position display
2. Drive program display

The indicators light up when the SmartKey is inserted into the ignition lock. The indicators go out when the SmartKey is removed from the ignition lock.

AMG vehicles: the current position of the selector lever is shown by the indicators next to the selector lever.

If the transmission position display in the multifunction display is not working, you should pull away carefully to check whether the desired transmission position is engaged. Ideally, you should select transmission position D and drive program E. Do not restrict the shift range.

    See also:

    Brake fluid
    WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in t ...

    Important notes on tire pressure
    WARNING Should the tire pressure drop repeatedly: • check the tire for foreign bodies. • check whether the wheel is losing air or the valve is leaking. • make sure that only a valve cap approved ...

    Refrigerant of the air-conditioning system
    The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could damage the air-condit ...