Replacing the windshield wiper blades

Removing the wiper blades

•► Remove the SmartKey from the ignition lock or turn it to position 0 (KEYLESS-GO).

•► Fold the wiper arm away from the windshield until it engages.

•► Set the wiper blade at right angles to the wiper arm.

•► Remove the wiper blade from the retaining

•► Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.

Installing the wiper blades

•► Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow.

Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.

•► Turn the wiper blade parallel to the wiper arm.

•► Fold the wiper arm back onto the windshield.

    See also:

    Haven of calm: optimum vibration and acoustic comfort
    The new M-Class promises relaxed and therefore safe motoring under all possible (and even impossible) conditions. By paying close attention to detail every step of the way, the development enginee ...

    Introduction
    SRS consists of: • the SRS warning lamp • air bags • air bag control unit (with crash sensors) • Emergency Tensioning Devices • belt force limiters SRS reduces the risk of occupants coming in ...

    Limited Warranty
    Follow the instructions in this manual about the proper operation of your vehicle as well as about possible vehicle damage. Damage to your vehicle that arises from culpable contraventions ag ...