General information
The program selector button influences:
• the drive program
• the AIRMATIC or ABC suspension settings
• the engine management
Program selector button
Program selector button on AMG vehicles
In AMG vehicles, drive program E is called drive program C.
For further information on the automatic
drive program.
AMG vehicles: only change from automatic drive program C or S to manual drive program M when the vehicle is stationary.
Press program selector button 1
repeatedly until the letter for the desired
gearshift program appears in the
multifunction display.
When the engine is started, the automatic
transmission always switches to automatic
drive program E (drive program C in AMG
vehicles).
See also:
Coolant
Important safety notes
The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs
the following tasks:
corrosion protection
antifreeze protection
raising the boiling ...
Activating/deactivating airrecirculation
mode
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
The operation of air-recirculat ...
Speed rating
The speed rating is part of the tire
identification. It specifies the speed range for
which the tire is approved. ...