Setting the exterior mirrors

This function is only available in vehicles for Canada.

If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when locking" function in the on-board computer.

•► Make sure that the SmartKey is in position 1 in the ignition lock.
•► Briefly press button 1.

    See also:

    Important safety notes
    WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could ca ...

    Introduction
    SRS consists of: • the 6 SRS warning lamp • air bags • air bag control unit (with crash sensors) • Emergency Tensioning Devices • belt force limiters SRS reduces the risk of occupants ...

    Replacing the windshield wiper blades
    Removing the wiper blades Before changing the wiper blades, always set the wiper arms to a vertical position using the combination switch. There is otherwise a risk of damaging the hood. Moving ...