Switching on/off

The steering-wheel heating heats the leather areas of the steering wheel

•► Make sure that the SmartKey is in position

•► Make sure that the SmartKey is in position 2 in the ignition lock.

•► To switch on/off: turn the lever in the direction of arrow 1 or 2.

Indicator lamp 3 lights up or goes out.

The steering wheel heating may switch off temporarily if:

 - the temperature of the vehicle interior is above 86 °F (30 °C).
 - the temperature of the steering wheel is above 95 °F (35 °C).

Indicator lamp 3 remains on.

Vehicles without KEYLESS-GO: when you remove the SmartKey from the ignition lock, the steering wheel heating is deactivated.

Vehicles with KEYLESS-GO: when you switch off the ignition and open the driver's door, the steering wheel heating is deactivated.

    See also:

    Switching the rear window wiper on/off
    Combination switch 1 Switch 2 To wipe with washer fluid 3 To switch on intermittent wiping 4 0 To switch off intermittent wiping 5 To wipe with washer fluid ► Turn the SmartKey to po ...

    Hill start assist
    Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This give ...

    Important safety notes
    DSR is an aid to assist you when driving downhill. It keeps the speed of travel at the speed selected on the on-board computer. The steeper the downhill gradient, the greater the DSR braking eff ...