installing and removing the seat cushion
You must remove the seat cushion if you wish to lift the trunk floor, e.g. if the vehicle has a flat tire.
•► To remove: fold seat cushion 2 upwards and remove it from seat cushion guides 1.
•► To install: guide seat cushion 2 into seat cushion guides 1 at a slight angle from the rear 3.
•► Fold seat cushion 2 back into its original position 4 until it engages.
See also:
Cleaning the seat belts
– Use clean, lukewarm water and soap
solution.
Do not clean the seat belts using chemical
cleaning agents. Do not dry the seat belts
by warming them above 176 °F (80 °C) or
placing them ...
Recommended tire pressure
The recommended tire pressure applies to
the tires mounted at the factory.
The Tire and Loading Information placard
contains the recommended tire pressures for
cold tires on a fully loaded vehi ...
Cleaning instructions
Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a ...