Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

•► Close all the doors.

•► Turn the SmartKey to position 1 or 2 in the ignition lock.

•► Pull the corresponding switch on the door control panel until the side window is completely closed.

•► Hold the switch for an additional second.

If the side window opens again slightly:

•► Immediately pull the corresponding switch on the door control panel until the side window is completely closed.

•► Hold the switch for an additional second.

•► If the corresponding side window remains closed after the button has been released, the side window has been reset correctly.

If this is not the case, repeat the steps above again.

    See also:

    Problems with PARKTRONIC
    Problem Possible causes/consequences and Solutions Only the red segments in the PARKTRONIC warning displays are lit. You also hear a warning tone for approximately two ...

    Adjusting the four-way lumbar support
    Vehicles with memory function: You can adjust the contour of the front seat backrests individually to provide optimum support for your back. To raise the backrest contour To soften the back ...

    Important notes on use
    To function properly, BlueTEC exhaust gas aftertreatment must be operated with the reducing agent DEF. Adding DEF is one of the tasks performed during maintenance. Under normal operating condi ...