Replacing the windshield wiper blades

Removing the wiper blades

•► Remove the SmartKey from the ignition lock or turn it to position 0 (KEYLESS-GO).

•► Fold the wiper arm away from the windshield until it engages.

•► Set the wiper blade at right angles to the wiper arm.

•► Remove the wiper blade from the retaining

•► Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.

Installing the wiper blades

•► Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow.

Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.

•► Turn the wiper blade parallel to the wiper arm.

•► Fold the wiper arm back onto the windshield.

    See also:

    Introduction
    In the DriveAssist. menu you can: - show the distance display - activate/deactivate PRE-SAFE® Brake - activate/deactivate ATTENTION ASSIST - activate/deactivate Blind Spot Assist or Active Blind ...

    Clearing the memory of the integrated garage door opener on the rear-view mirror
    Turn the SmartKey to position 2 in the ignition lock. Press transmitter buttons 2 and 4. The indicator lamp lights up yellow. Press and hold transmitter buttons 2 and 4 until the indic ...

    Using the rear center seat belt
    If the left-hand rear seat backrest is folded down and back up again, the rear center seat belt may lock. The seat belt can then not be pulled out. To release the rear center seat belt: pull out ...