Switching the rear window wiper on/ off

Combination switch

Combination switch

1. Switch
2. To wipe with washer fluid
3. I To switch on intermittent wiping
4. 0 To switch off intermittent wiping
5. •► Turn the SmartKey to position 1 or 2 in the To wipe with washer fluid

•► Turn the SmartKey to position 1 or 2 in the ignition lock.

•► Turn switch 1 on the combination switch to the corresponding position.

When the rear window wiper is switched on, the icon appears in the instrument cluster.

    See also:

    Opening the hood
    WARNING Do not pull the release lever while the vehicle is in motion. Otherwise, the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and ...

    Driving tips
    Kickdown Use kickdown for maximum acceleration. ► Vehicles for USA: fully depress the accelerator pedal. The transmission shifts to a lower gear depending on the engine speed. ► ...

    Overview: changing bulbs/bulb types
    You can change the following bulbs. The bulb type can be found in the legend. Halogen headlamps Turn signal lamp/side marker lamp: WY 5 W Turn signal lamp: PY 21 W High-beam headlamp: H7 55 ...