Checking the coolant level

Only check the coolant level when the vehicle is on a level surface and the engine has cooled down.

2 in the ignition lock. Turn the SmartKey to position 2 in the ignition lock.
On vehicles with KEYLESS-GO, press the Start/Stop button twice.
display in Check the coolant temperature display in the instrument cluster.
The coolant temperature must be below 158 °F (70 °C).

WARNING
In order to avoid any potentially serious burns:
• use extreme caution when opening the hood if there are any signs of steam or coolant leaking from the cooling system, or if the coolant temperature display indicates that the coolant is overheated.
• do not remove the pressure cap on the coolant reservoir if the coolant temperature is above 158
°F (70 °C). Allow the engine to cool down before removing the cap. The coolant reservoir contains hot fluid and is under pressure.
• using a rag, slowly turn the cap approximately 1/2 turn to relieve excess pressure. If opened immediately, scalding hot fluid and steam will be blown out under pressure.
• do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts.

counterclockwise Slowly turn cap 1 half a turn counterclockwise and allow excess pressure to escape.
counter-clockwise and Turn cap 1 further counter-clockwise and remove it.
If the coolant is at the level of marker bar 3 in the filler neck when cold, there is enough coolant in coolant expansion tank 2.
If the coolant is approximately 0.6 in (1.5 cm) above marker bar 3 in the filler neck when warm, there is enough coolant in coolant expansion tank 2.
been If necessary, add coolant that has been tested and approved by Mercedes-Benz.
as far Replace cap 1 and turn it clockwise as far as it will go.

For further information on coolant.

    See also:

    General notes
    The Active Driving Assistance package consists of DISTRONIC PLUS, Active Blind Spot Assist and Active Lane Keeping Assist. ...

    Activating/deactivating PRE-SAFE® Brake
    PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS. – Press the or button on the steering wheel to select the DriveAssist menu. – Press or to select PRE-SAFE Brake. – P ...

    4MATIC (permanent four-wheel drive)
    4MATIC ensures that all four wheels are permanently driven. Together with ESP®, it improves the traction of your vehicle whenever a drive wheel spins due to insufficient grip. WARNING If a ...