Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from returning to the preset speed
could cause an accident and/or serious injury
to you and others.
Briefly pull the cruise control
lever towards you 4.
Remove your foot from the
accelerator pedal.
The first time cruise control is activated, it
stores the current speed or regulates the
speed of the vehicle to the previously
stored speed.
See also:
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the Daytime Running
Light function and the light switch is in the
or
position, the daytime running
lamps are switched on autom ...
Hill start assist
Hill start assist helps you when pulling away
forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you
have removed your foot from the brake pedal.
This give ...
Automatic steering: this is how the parking process works
The Active Parking Assist parking process begins when the vehicle is in front
of the parking space indicated by the arrow, facing the direction of travel, and
the driver has engaged reverse gear a ...