Vehicles with automatic transmission

Shift the transmission to position Apply the parking brake firmly.

P. Shift the transmission to position P.

Using the SmartKey

in the ignition lock and remove it. Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.

if the The SmartKey can only be removed if the transmission is in position P.

Using KEYLESS-GO

The engine stops and all the indicator Press the Start/Stop button.
The engine stops and all the indicator lamps in the instrument cluster go out.

closed, this When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".

If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.

    See also:

    Vehicle identification p
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on the ...

    Making adjustments in 5 mph (Canada: 10 km/h) increments
    Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...

    Vehicles without extended Off-Road Proengineering package
    Basic setting The extent to which the vehicle is raised or lowered depends on the basic setting selected. Select: • Raised level, for driving on normal off-road terrain • Highway/high-speed ...